down the page so you do not miss anything we have here.
E-mail us or call 888-849-6160 with any questions.
for Tailer in A Bag trailers to tow your bike
that completely brake down for
easy storage Anywhere!
for the MCK2 econo bike tie down frame
Call 888-849-6160 for availability
The Stow N Go $895.00
for Aluminum Cargo Trailers
For our 12 inch wheel upgrade
on UMCT1 and UDBT2 please
Click Here to add $96.00 to the order
I recently received an e-mail from a rider with a full dress motorcycle who was concerned about the 980 pound carrying capacity of the UMTC1 trailer. He asked about the 12 inch wheel and tire upgrade and if it would raise the load rating for the trailer. I forwarded the message to Gary at the factory and here is the answer he sent:
The capacity of the trailer can be increased to 1200 lbs. when you add the 12" tires, you simply need to let us know that is what you want. The trailer has leaf spring suspension [no torsion axles that tend to wear out tires] 1 ton high speed axle with 1" taped roller bearings, 5 hole hubs, 4 ply tires, and the adjustable tongue length aids in both ride and ease in backing up.
Check this out
for DIRT bikes up
to about 400 pounds
Dirt bike trailer uses two 80" LONG X 6" wide composite rail channels, and one 80" X 6" loading ramp channel. Channels constructed from 1/2" plywood encapsulated on each side by 1/4" fiberglass unit also includes 6 eye bolts for tying down with ratchet straps (straps not included). 2" ball coupler, pre-wired lights, ADJUSTABLE TONGUE LENGTH - trailer can be shortened to 8 ft. long for vertical storage. 500cc limit on cycle size, 480 x 8B rims and tires, white powdercoat finish. It measures 11 ft long by 56" wide. Shipped knocked-down.
UDBT-2 is priced at only $1,120.00 plus shipping.
Click Here to BUY the UDBT-2
Be SURE to Click on CHECKOUT to complete the order!
Assembly Overview of the Motorcycle Hauler Trailers
These trailers average about 45 minutes to and hour Assembly time for the average buyer. The frame section requires no Assembly because it is welded together and constructed from SQUARE TUBING not "U" Channel material like many other trailer kits on the market. The square tubing frame is much stronger than a frame made from "U" channel material.
- 3 "U" bolts tongue to frame
- 2 bolts coupler to tongue
- 4 bolts springs to axle
- 4 "U" bolts fenders to frame
- 6 bolts motorcycle channel to frame
- Light kit is pre-wired
- Average assembly time 45 minutes to and hour