Free shipping does NOT apply to parts or options not purchased with trailer!

Please Click HERE to E-mail us with any questions. These trailers are designed to carry your larger displacement motorcycle with ease. Note the drive up guide on the trailer floor and the exclusive front wheel lock down device. We asked the factory about loading TWO motorcycles by yourself. Here's their reply:
To load a second bike on the double trailer by yourself it is a good idea to bolt a tongue jack to the front of the trailer bed so you can crank the trailer bed into the tilted postion. We have the jack, part A253 $79.00 if shipped with trailer order.

A front mount Rock Guard is available, as shown on the 12 and 13 inch wheel trailers, single trailer $120.00 three piece for the twin trailer $240.00 (tongue jack stand pictured is NOT included).

These new SUPER LOW PROFILE tilt trailers have 13 and 12 INCH WHEELS! We have a torsion axel suspenion custom configured for these trailers to allow the LARGE wheel and the LOW profile! TWO BIKE model LTB1-LP-HD-setup $2,345 value Big Bike Special only $2,195.00 SAVE $150 on the package Plus ship 13" wheels as shown (except plywood and optional rock guard) Load rated at 2300 lbs with the b78x13c wheels and tires, 76"x100 bed size. Trailer Only $1,635.00 + Ship ONE BIKE model UTB1-LP-HD-setup $1,380.00 Plus Ship 12' Wheels as shown (except plywood and optional rock guard) Load rated at 1250 lbs with the 480x12b wheels and tires, 52" x100 bed size. Trailer Only $1025.00 + Ship These trailers DO require assembley, tools and purchase of green treated plywood to set up. You should have mechanical ability and experience to set up these trailers. Click Here to buy the TWO BIKE low profile HD trailer (13" wheels) Click Here to buy the ONE BIKE low profile HD trailer (12" wheels) The CAGE on the MCK1 tie down system will fit to tires 5 inches wide OR UNDER! It will not work on motorcycle with solid front wheels EG. Harley Fatboy (with solid wheels), The Honda VTX (front tire too wide) Will NOT fit. If you have a HIGH bumber you may need an offset trailer hitch adaptor like the one shown, EXCEPT it will need to be reversed so it lowers the ball instead of raises it. This is Part RHOST1 $81.00. .

Click Here for more photos of these new trailers